Concrete Sealer Base Finish










 

Seals porous stone and concrete surfaces

Sun Frog CONCRETE SEALER – BASE FINISH is a strong blend of acrylic and epoxy-like solids to provide an aesthetic enhancing seal to porous stone and concrete surfaces. When applied correctly it protects these surfaces from penetration by Oils, Rust, Stains & Water. It thereby reduces Spalling (freeze/thaw physical damage) and efflorescence, leaving a beautified surface more cleanable and easily cleaned of dirt, stains, etc. Unfortunately, we are unable to ship this product out of the United States.

USES AND BENEFITS:

  • Garage Floors & Pool Decks. Quarry & Unglazed Tile. Flag and Patio Stones. Concrete Walkways and Retaining Walls.
  • Can be used on canvas and even wood surfaces.
  • Aids in solidifying concrete and exposed aggregate so that less damage is done when pressure washed.

Qty

 Size

1 Gallon

Retail Price: $32.00
Qty

 Size

5 Gallon

Retail Price: $140.00

A Material Safety Data Sheet is available for Concrete Sealer Base using Adobe Acrobat. If you do not have Adobe Acrobat, it is available free of charge by clicking the link below.

DIRECTIONS FOR USE:

  • Do not seal dirty or stained surfaces. Pre-cleaning with Sun Frog Deck or Composite Deck Cleaner is advised. Rinse and let dry. Stains may need removing with Muriatic Acid, Stripper, or other chemical aide. Ask your local hardware store for suggestions here. Use at full strength. Note: If mold, mildew or algae is present or a problem, adding bleach to cleaning solution is an effective addition. Follow bleach container cautions if bleach is added and worked with. If Acid washed, neutralizing to PH 7 is advised prior to sealing.
  • Shake BASE FINISH container before placing in a dispensing container. Apply with a brush, roller, pad or airless sprayer. Back brush or broom to minimize unpenetrated, excess puddling. Let dry 2-3 hours. Do not allow to get wet with additional water during dry phase or water spotting can occur.
  • For the "Wet Look", a second light coat can be applied after the first coat is dry.


COVERAGE (sq ft / gal): Rough Concrete 150-250; Flagstone 100-125; Slate, Terrazzo, Brick 400-500; Smooth Concrete, Brick 300-400; Exposed Aggregate 150-250; Unglazed Tile 250-300. Second coats get approx 50% more coverage than first.

CAUTIONS: If sprayed, do not breath vapors or mists- wear respiratory protection.

PACKAGING: Gallons and Five-Gallon Pails

PHYSICAL PROPERTIES: Type - Whitish clear liquid, Surfactant charge - Nonionic, PH 1% solution - 10.8 +/-, Freeze/Thaw Stability - Do Not Freeze

A Material Safety Data Sheet is available for Concrete Sealer Base Finish by download using Adobe Acrobat. If you do not have Adobe Acrobat, it is available free of charge by clicking the link below.

© 2001 Sun Frog, Portland Oregon